All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 3 LEFT NOT REORDERING!!! All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 3 1/2" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 3/4" x 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 4 LEFT NOT REORDERING!!! All sizes are approximate - pieces are on thick 1.2mm box board. There is 1 sheet that measure 4 1/2" x 6 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 1 LEFT NOT REORDERING!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 frames the longest that measure 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 2 LEFT NOT REORDERING!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 frames the longest that measure 4 3/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 1 sheet that measure 4 1/4" x 4 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 1 sheet that measure 4 1/4" x 4 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 1 sheet that measure 4 1/4" x 4 1/2" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate 2 pieces which are 2 different sizes the widest being 5 1/2". The chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

All sizes are approximate 2 pieces which are 2 different sizes the widest being ". The chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 1 LEFT NOT REORDERING!!! All sizes are approximate 2 pieces which are 2 different sizes the widest being 5 1/2". The chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 3 LEFT NOT REORDERING!!! All sizes are approximate 2 pieces which are 2 different sizes the widest being 4 1/2". The chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 2 LEFT NOT REORDERING!!! All sizes are approximate 2 pieces which are 2 different sizes the widest being 4 1/2". The chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 3 1/2" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 3 1/2" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

ONLY 1 LEFT NOT REORDERING!!! This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 4 1/4" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 3 1/2" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges

This is not your mom's chipboard but gorgeous laser cut delicate beauty!!! All sizes are approximate - pieces are on thick 1.2mm box board. There are 2 sheets that measure 3 1/2" x 4 1/4" that contain the chipboard pieces which are laser cut. Each embellishment is held in place by some small tabs which need to be cut free. With the front facing you, use a sharp cutting knife and gently press down on the tab to cut through. Try not to drag the knife as you could tear the finer detail sections. Using a craft pick or pin, poke through any centres that are still in place. Due to the very fine detail in parts of the design some sections may not cut right through the backing paper. If you have trouble freeing a design, turn the card over and using your sharp knife lightly cut through the areas that are stuck carefully. Paint them, emboss them, stamp them, ink them, color with markers, liquid pearls and glitter or leave plain for a rustic look! Add rhinestones or pearls to make them even fancier. Decorate corners, place under flowers, frame pictures and more. PLEASE NOTE: Some staining does occur on reverse and edges